Raspberry Pi board support

Setup information Mailing list

Git repository

git://git.yoctoproject.org/meta-raspberrypi web repo

Last commit: 11 years, 1 month ago (dylan branch)



The meta-raspberrypi layer depends upon:

Recipe name Version Description
bcm2835 1.8 Package that provides access to GPIO and other IOfunctions on the Broadcom BCM 2835 chip, allowing access to theGPIO pins on the 26 pin IDE plug on the RPi board
bcm2835-bootfiles 20130107 Closed source binary files to help boot the ARM on the BCM2835.
linux-libc-headers-raspberrypi 3.2.27 Sanitized set of kernel headers for the C library's use.
linux-raspberrypi 3.6.11+git31a951046155b27361127d9cf85a1f58719fe9b3 Linux kernel for the RaspberryPi board
linux-raspberrypi 3.2.27+git10182a3bc434b27740f81c2b836a1af943060241 Linux kernel for the RaspberryPi board
omxplayer git OMXPlayer is a commandline OMX player for the Raspberry Pi
rpi-basic-image 1.0 A small image just capable of allowing a device to boot.
rpi-config 0.1 Commented config.txt file for the Raspberry Pi. The Raspberry Pi config.txt file is read by the GPU before the ARM core is initialised. It can be used to set various system configuration parameters.
rpi-first-run-wizard 1.0 Scripts to support a first run wizard on the Raspberry Pi.
RPi-GPIO 0.2.0 A module to control Raspberry Pi GPIO channels
rpi-hwup-image 1.0 A small image just capable of allowing a device to boot.
userland git This repository contains the source code for the ARM side libraries used on Raspberry Pi. These typically are installed in /opt/vc/lib and includes source for the ARM side code to interface to: EGL, mmal, GLESv2,vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
vc-graphics 20130107 Graphics libraries for BCM2835.
vc-graphics-hardfp 20130107 Graphics libraries for BCM2835.
raspberrypi RaspberryPi http://www.raspberrypi.org/ Board