| bt-firmware |
git |
Firmware files for TI Bluetooth Chips |
| linux-seco |
3.14.28 |
Seco kernel based on the FSL BSP Linux |
| linux-udooboard |
3.14.56 |
Linux kernel for UDOO boards |
| m4-firmware |
v2.0rc1 |
Cortex M4 firmware files for UDOO Neo boards. |
| m4uploader |
0.1.1+gitX |
Load an MQX binary to UDOO Neo M4 Core This application works as an uploader that loads compiled binaries into UDOO Neo DDR RAM and runs it. Also copy the last binary to /var/opt/m4 for next reboot. |
| qt5-env |
1.0 |
Add Qt5 bin dir to PATH |
| resize-rootfs |
1.0 |
Resize Rootfs systemd service |
| u-boot-seco |
2016.01 |
Universal Boot Loader for embedded devices |
| u-boot-udooboard |
git |
Universal Boot Loader for embedded devices |
| udoo-image-full-cmdline |
1.0 |
A console-only image with more full-featured Linux system functionality installed. Tailored for the UDOO boards |
| udoo-image-qt5 |
|
|
| udoofota |
0.1+gitX |
UDOO Firmware Over the Air Uploader -- Server A little client-server protocol written in C over TCP/IP to enable uploading via network for UDOO. |
| uim-sysfs |
8.5 |
Shared Transport Line Discipline User Mode initialisation Manager Daemon |
| wl18xx-conf |
R8.6+gitX |
Configuration utility for TI wireless drivers |