| azure-iot-sdk |
1.1.24 |
Microsoft Azure IoT SDKs and libraries for C |
| bjam-native |
1.61.0 |
Portable Boost.Jam build tool for boost |
| bluez5 |
5.48 |
Linux Bluetooth Stack Userland V5 |
| boost |
1.61.0 |
Free peer-reviewed portable C++ source libraries |
| bsp-version |
1.0.0 |
Version package |
| canfestival4linux |
2.0.0 |
canfestival library for Linux |
| cellularctl |
1.0.0 |
Tool for controlling cellular modules of S Core based products |
| cmake |
3.12.2 |
Cross-platform, open-source make system |
| cmake-native |
3.12.2 |
Cross-platform, open-source make system |
| cppzmq |
4.1.5+gitX |
C++ bindings for ZeroMQ |
| flashubi |
1.1.0 |
Writing rootFS from compressed tar archive to ubi volume |
| fmtlib |
5.1.0 |
fmt library |
| gsmmux |
1.0 |
Terminal Mutlitplexer for GSM Modems |
| ifplugd |
0.25 |
ifplugd is a Linux daemon which will automatically configure your ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled. |
| libwebsockets |
3.1.0 |
Websocket C library |
| mosquitto |
1.6.2 |
MQTT 3.1 compliant library |
| nmap |
|
|
| openjre8-zulu |
172b106 |
Java Runtime environment based by Azul-Systems |
| paho-mqtt-c |
1.2.0 |
Paho MQTT - C libraries for the MQTT and MQTT-SN protocols |
| paho-mqtt-cpp |
1.0.0 |
Paho MQTT - CPP libraries for the MQTT and MQTT-SN protocols |
| ppp-configuration |
1.0 |
Example configuration for ppp service |
| python-can |
2.2.1 |
Controller Area Network (CAN) interface module for Python |
| python-sysfs-gpio |
0.2.1 |
GPIO Library |
| python-wrapt |
1.11.2 |
A Python module for decorators, wrappers and monkey patching. |
| python3-gattlib |
0.20200122 |
Library to access Bluetooth LE devices |
| python3-pybluez |
0.22 |
Bluetooth Python extension module |
| python3-smbus |
3.1.2 |
Set of i2c tools for linux - Python module |
| python3-tblib |
1.3.2 |
Traceback serialization library. |
| redis |
4.0.8 |
Redis key-value store |
| scanfestival |
1.0.0 |
sitec version of CanFestival library |
| sitec-image |
1.0 |
A small image just capable of allowing a device to boot. |
| sitec-initramfs-image |
1.0 |
A small image just capable of allowing a device to boot. |
| sitec-recovery-image |
1.0 |
A small image just capable of allowing a device to boot. |
| sitec-world-image |
1.0 |
A small image just capable of allowing a device to boot. |
| tinc |
1.1pre17 |
tinc vpn software |
| ublox-firmware |
1.0 |
Firmware files for u-blox modules |
| ublox-udev |
1.3 |
UDEV Rules for u-Blox modems |
| usbnet |
1.1 |
Activate and initialize the usb net interface |
| vbusenable |
1.0.0 |
Enable the vbus voltage for USBOTG2 |
| zeromq |
4.1.6 |
ZeroMQ looks like an embeddable networking library but acts like a concurrency framework |