| clock-relay |
0.0.2-1 |
Specialization of message_relay for clock |
meta-ros1-melodic |
| cloudwatch-logger |
2.2.1-1 |
CloudWatch Logger node for publishing logs to AWS CloudWatch Logs |
meta-ros1-melodic |
| cloudwatch-logger |
3.0.0-2 |
CloudWatch Logger node for publishing logs to AWS CloudWatch Logs |
meta-ros2-dashing |
| cloudwatch-logs-common |
1.1.2-1 |
AWS CloudWatch management library used by ROS1/2 node to publish logs to CloudWatch service |
meta-ros1-melodic |
| cloudwatch-logs-common |
1.1.2-1 |
AWS CloudWatch management library used by ROS1/2 node to publish logs to CloudWatch service |
meta-ros2-dashing |
| cloudwatch-metrics-collector |
2.2.0-1 |
Subscriber node for the aws/monitoring topic to publish metrics to AWS Cloudwatch |
meta-ros1-melodic |
| cloudwatch-metrics-collector |
3.0.0-2 |
Subscriber node for the aws/monitoring topic to publish metrics to AWS Cloudwatch |
meta-ros2-dashing |
| cloudwatch-metrics-common |
1.1.2-1 |
Library used by ROS1/2 node to publish metrics |
meta-ros1-melodic |
| cloudwatch-metrics-common |
1.1.2-1 |
Library used by ROS1/2 node to publish metrics |
meta-ros2-dashing |
| clucene-core |
2.3.3.4 |
CLucene is a indexing and searching API |
meta-office |
| cmake |
3.14.1 |
Cross-platform, open-source make system |
openembedded-core |
| cmake |
3.13.4 |
Cross-platform, open-source make system |
meta-debian |
| cmake-modules |
0.4.2 |
A common repository for CMake Modules which are not distributed with CMake but are commonly used by ROS packages. |
meta-ros1-melodic |
| cmake-modules-webos-native |
1.6.3-1+gitX |
CMake modules used by webOS |
meta-luneui |
| cmake-modules-webos-native |
1.6.3-3 |
CMake modules used by webOS |
meta-webosose |
| cmark |
0.29.0 |
CommonMark parsing and rendering library and program in C |
meta-qt5-extra |
| cmpi-bindings |
1.0.1 |
Adapter to write and run CMPI-type CIM providers |
meta-oe |
| cob-3d-mapping-msgs |
0.6.15-1 |
Message, service and action definitions for environment perception. |
meta-ros1-melodic |
| cob-actions |
0.7.2-1 |
This Package contains Care-O-bot specific action definitions. |
meta-ros1-melodic |
| cob-androidblacklisted |
0.1.7-1 |
cob_android package provides tools for android apps operation. |
meta-ros1-melodic |
| cob-android-msgs |
0.1.7-1 |
cob_android_msgs |
meta-ros1-melodic |
| cob-android-resource-server |
0.1.7-1 |
cob_android_resource_server |
meta-ros1-melodic |
| cob-android-script-serverblacklisted |
0.1.7-1 |
cob_android_script_server |
meta-ros1-melodic |
| cob-android-settings |
0.1.7-1 |
cob_android_settings |
meta-ros1-melodic |
| cob-base-controller-utils |
0.8.11-1 |
The cob_base_controller_utils package contains common utils for various base_controllers. |
meta-ros1-melodic |
| cob-base-drive-chainblacklisted |
0.7.1-1 |
This package contains classes that are able to control the platform of the Care-O-Bot. This means to establish a CAN communication to drive and steering motors of the platform and later send motion commands and receive motor information. |
meta-ros1-melodic |
| cob-base-velocity-smoother |
0.8.11-1 |
The 'cob_base_velocity_smoother' reads velocity messages and publishes messages of the same type for "smoothed" velocity to avoid shaking behavior. |
meta-ros1-melodic |
| cob-bms-driver |
0.7.1-1 |
Driver package for interfacing the battery management system (BMS) on Care-O-bot. |
meta-ros1-melodic |
| cob-calibration-data |
0.6.14-1 |
This repository holds the current calibration data for Care-O-bot. |
meta-ros1-melodic |
| cob-cam3d-throttle |
0.6.15-1 |
cob_cam3d_throttle: only for Trottel |
meta-ros1-melodic |
| cob-camera-sensors |
0.7.1-1 |
For more information read the readme.htm file located in |
meta-ros1-melodic |
| cob-canopen-motorblacklisted |
0.7.1-1 |
The package cob_canopen_motor implements a controller-drive component which is connected to a can-bus and works with a canopen-interface. "CanDriveItf" provides a - more or less - generic interface to the controller-drive components. "CanDrvie..." then implements a specific setup, e.g. an ELMO Harmonica Controller in case of the "CanDriveHarmonica". |
meta-ros1-melodic |
| cob-cartesian-controllerblacklisted |
0.8.11-1 |
This package provides nodes that broadcast tf-frames along various (model-based) Cartesian paths (e.g. Linear, Circular). The tf-frames are interpolated using a given velocity profile (e.g. Ramp, Sinoid) and can be used as targets for the cob_frame_tracker/cob_twist_controller. |
meta-ros1-melodic |
| cob-collision-monitorblacklisted |
0.7.3-1 |
The collision monitor uses the planning scene monitor to read the state of the robot and check it for collision with itselt or the environment. It addition a ground plane is added in any case. Can be used as a stand-aloan node or a move_group capability. |
meta-ros1-melodic |
| cob-collision-velocity-filter |
0.8.11-1 |
The cob_collision_velocity_filter package is a package for collision avoidance using teleoperation. |
meta-ros1-melodic |
| cob-command-guiblacklisted |
0.6.16-1 |
This package provides a simple GUI for operating Care-O-bot. |
meta-ros1-melodic |
| cob-command-toolsblacklisted |
0.6.16-1 |
The cob_command_tools stack provides tools, for operating Care-O-bot. |
meta-ros1-melodic |
| cob-commonblacklisted |
0.7.2-1 |
The cob_common stack hosts common packages that are used within the Care-O-bot repository. E.g. utility packages or common message and service definitions etc. Also the urdf desciption of the robot is located in this stack. |
meta-ros1-melodic |
| cob-controlblacklisted |
0.8.11-1 |
cob_control meta-package |
meta-ros1-melodic |
| cob-control-mode-adapter |
0.8.11-1 |
The cob_control_mode_adapter package provides a node that automatically loads respective ros_controllers depending on required control mode. |
meta-ros1-melodic |
| cob-control-msgs |
0.8.11-1 |
Common messages and services used in various packages within cob_control. |
meta-ros1-melodic |
| cob-dashboardblacklisted |
0.6.16-1 |
cob_dashboard is a modified version of [[pr2_dashboard]]. |
meta-ros1-melodic |
| cob-default-env-config |
0.6.11-1 |
This package contains configuration files for the default environments for Care-O-bot supported by IPA. |
meta-ros1-melodic |
| cob-default-robot-behaviorblacklisted |
0.7.2-1 |
The cob_default_robot_behavior package |
meta-ros1-melodic |
| cob-default-robot-config |
0.7.2-1 |
Default configuration of the different robots supported by the Care-O-bot stacks. Configuration is e.g. preconfigured joint positions. |
meta-ros1-melodic |
| cob-descriptionblacklisted |
0.7.2-1 |
This package contains the description (mechanical, kinematic, visual, etc.) of the Care-O-bot robot. The files in this package are parsed and used by a variety of other components. Most users will not interact directly with this package. |
meta-ros1-melodic |
| cob-docker-control |
0.6.9-1 |
Autonomous docking |
meta-ros1-melodic |
| cob-driverblacklisted |
0.7.1-1 |
The cob_driver stack includes packages that provide access to the Care-O-bot hardware through ROS messages, services and actions. E.g. for mobile base, arm, camera sensors, laser scanners, etc... |
meta-ros1-melodic |
| cob-elmo-homingblacklisted |
0.7.1-1 |
This packagae implements the special homing procedure that is needed for old cob4/raw bases |
meta-ros1-melodic |
| cob-environments |
0.6.11-1 |
This stack holds packages for IPA default environment configuration. |
meta-ros1-melodic |