airspy-tools |
1.0.9 |
AirSpy userspace utilities |
base-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building UHD installed. |
gnuradio |
v3.10.11.0 |
GNU Radio: A software defined radio framework. |
gnuradio-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
gnuradio-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
gnuradio-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
gnuradio-ptest-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
gnuradio-video-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
gqrx |
2.15.9 |
SDR powered by GNU Radio and Qt |
gqrx-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
gr-adsb |
0.0.4+gitX |
A GNU Radio out-of-tree (OOT) module to demodulate and decode Automatic Dependent Surveillance Broadcast (ADS-B) messages |
gr-air-modes |
0.0.2+gitX |
A mode S receiver for GNU Radio. |
gr-ais |
0.0.3+gitX |
Automatic Information System decoder for shipborne position reporting for the Gnuradio project |
gr-baz |
0.0.7+gitX |
Collection of new blocks for GNU Radio |
gr-burst |
0.0.5+gitX |
This out of tree module contains a number of blocks which help enable building simple burst PSK modems in GNU Radio. |
gr-enocean |
1.0.0+gitX |
This out of tree module contains blocks for processing the gr-eonocean waveform |
gr-ettus |
0.0.4+gitX |
Experimental UHD and USRP features for GNU Radio. |
gr-eventstream |
0.0.5+gitX |
GNU Radio Event Stream |
gr-foo |
0.0.4+gitX |
This is a collection of custom blocks that are not directly associated with a project. |
gr-framers |
0.0.3+gitX |
This out of tree module contains several different framers and deframers which may be used with GNU Radio flowgraphs |
gr-ieee80211 |
0.0.4+gitX |
This an IEEE 802.11 a/g/p transceiver for GNU Radio that is fitted for operation with Ettus N210s and B210s. Interoperability was tested with many off-the-shelf WiFi cards and IEEE 802.11p prototypes. |
gr-lfast |
1.0.0+gitX |
The goal of the gr-lfast project is to increase flowgraph performance while running on a general purpose CPU. So far the project uses several techniques to achieve the performance boosts: |
gr-mac |
0.0.1+gitX |
Easy-to-use MAC-layer implementations for GNU Radio. |
gr-mapper |
0.0.4+gitX |
This out of tree module contains a number of blocks to help perform mapping between bits and symbols |
gr-mesa |
0.0.4+gitX |
This out of tree module contains a number of blocks to help perform mapping between bits and symbols |
gr-message-tools |
0.0.4+gitX |
This is a OOTM to help with simple debugging with the PMT messages. |
gr-osmosdr |
0.2.4 |
OsmocomSDR gnuradio block set |
gr-pager |
1.0.0+gitX |
This is an out-of-tree (OOT) module for GNU Radio which can demodulate and decode Motorola FLEX radiopager signals. |
gr-satellites |
0.0.4+gitX |
gr-satellites is a GNU Radio out-of-tree module encompassing a collection of telemetry decoders that supports many different Amateur satellites. |
libairspy |
1.0.9 |
AirSpy userspace libraries |
libhackrf |
0.0.2 |
Libhackrf |
packagegroup-sdr |
1.0 |
|
packagegroup-sdr-base |
1.0 |
|
packagegroup-uhd |
1.0 |
|
rtl-sdr |
0.6.0+git |
Software to turn the RTL2832U into a SDR |
uhd |
3.15.LTS |
Universal Hardware Driver for Ettus Research products. |
uhd-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio installed. |
uhd-firmware |
003.010.002.000 |
Universal Hardware Driver Firmware |
volk |
3.1.1 |
The Vector Optimized Library of Kernels |