| airspy-tools |
1.0.9 |
AirSpy userspace utilities |
| base-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building UHD installed. |
| gnuradio |
3.10.10.0+gitX |
GNU Radio: A software defined radio framework. |
| gnuradio-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-ptest-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-video-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gqrx |
2.15.9 |
SDR powered by GNU Radio and Qt |
| gqrx-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gr-adsb |
0.0.4+gitX |
A GNU Radio out-of-tree (OOT) module to demodulate and decode Automatic Dependent Surveillance Broadcast (ADS-B) messages |
| gr-air-modes |
0.0.2+gitX |
A mode S receiver for GNU Radio. |
| gr-ais |
0.0.3+gitX |
Automatic Information System decoder for shipborne position reporting for the Gnuradio project |
| gr-ettus |
0.0.4+gitX |
Experimental UHD and USRP features for GNU Radio. |
| gr-foo |
0.0.4+gitX |
This is a collection of custom blocks that are not directly associated with a project. |
| gr-ieee80211 |
0.0.4+gitX |
This an IEEE 802.11 a/g/p transceiver for GNU Radio that is fitted for operation with Ettus N210s and B210s. Interoperability was tested with many off-the-shelf WiFi cards and IEEE 802.11p prototypes. |
| gr-lfast |
1.0.0+gitX |
The goal of the gr-lfast project is to increase flowgraph performance while running on a general purpose CPU. So far the project uses several techniques to achieve the performance boosts: |
| gr-lora-sdr |
1.0.0+gitX |
This is the fully-functional GNU Radio software-defined radio (SDR) implementation of a LoRa transceiver with all the necessary receiver components to operate correctly even at very low SNRs. This wor |
| gr-mesa |
1.0.0+gitX |
Collection of Advanced GNURadio Processing Blocks - Autodoppler, input selection, and signal detection |
| gr-osmosdr |
0.2.4 |
OsmocomSDR gnuradio block set |
| gr-pager |
1.0.0+gitX |
This is an out-of-tree (OOT) module for GNU Radio which can demodulate and decode Motorola FLEX radiopager signals. |
| gr-satellites |
5.6.0+gitX |
gr-satellites is a GNU Radio out-of-tree module encompassing a collection of telemetry decoders that supports many different Amateur satellites. |
| libairspy |
1.0.9 |
AirSpy userspace libraries |
| libhackrf |
0.0.2 |
Libhackrf |
| packagegroup-sdr |
1.0 |
|
| packagegroup-sdr-base |
1.0 |
|
| packagegroup-uhd |
1.0 |
|
| python3-construct |
2.10.67 |
Python declarative parser for binary data |
| rtl-sdr |
0.6.0+git |
Software to turn the RTL2832U into a SDR |
| uhd |
3.15.LTS |
Universal Hardware Driver for Ettus Research products. |
| uhd-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio installed. |
| uhd-firmware |
003.010.002.000 |
Universal Hardware Driver Firmware |
| volk |
3.1.1+gitX |
The Vector Optimized Library of Kernels |