meta-raspberrypi
Raspberry Pi board support
Setup information Mailing list
Git repository
git://git.yoctoproject.org/meta-raspberrypi web repo
Last commit: 1 month, 2 weeks ago (scarthgap branch)
Maintainer
- Andrei Gherzan email
Dependencies
The meta-raspberrypi layer depends upon:
Recommends
The meta-raspberrypi layer recommends:
| Recipe name | Version | Description |
|---|---|---|
| armstubs | 20220711 | Boot strap code that the GPU puts on memory to start running the boot loader |
| bcm2835 | 1.73 | Package that provides access to GPIO and other IOfunctions on the Broadcom BCM 2835 chip, allowing access to theGPIO pins on the 26 pin IDE plug on the RPi board |
| bluez-firmware-rpidistro | 1.2-9+rpt3 | Linux kernel Bluetooth firmware files from Raspbian distribution |
| gpio-shutdown | 1.0 | GPIO shutdown bindings for SysV init |
| libcamera-apps | 1.4.2+gitX | A suite of libcamera-based apps |
| linux-firmware-rpidistro | 20230625-2+rpt3 | Linux kernel firmware files from Raspbian distribution |
| linux-raspberrypi | 6.6.22+gitX | Linux kernel |
| linux-raspberrypi | 6.1.77+gitX | Linux kernel |
| linux-raspberrypi-dev | 5.10.y+gitX | Linux kernel |
| linux-raspberrypi-v7 | 6.6.22+gitX | Linux kernel |
| linux-raspberrypi-v7 | 6.1.77+gitX | Linux kernel |
| omxplayer | git | A commandline OMX player for the Raspberry Pi |
| packagegroup-rpi-test | 1.0 | RaspberryPi Test Packagegroup |
| pi-blaster | git | This project enables PWM on the GPIO pins you request of a Raspberry Pi. |
| pi-bluetooth | 0.1.17 | Script to properly configure BT-HCI on Raspberry Pi |
| picamera-libs | 20230509~buster | Raspberrypi firmware libraries which are required by picamera library |
| python3-adafruit-blinka | 6.2.2 | CircuitPython APIs for non-CircuitPython versions of Python such as CPython on Linux and MicroPython. |
| python3-adafruit-circuitpython-busdevice | 5.0.5 | CircuitPython bus device classes to manage bus sharing. |
| python3-adafruit-circuitpython-motor | 3.2.6 | CircuitPython helper library provides higher level objects to control motors and servos. |
| python3-adafruit-circuitpython-motorkit | 1.6.1 | CircuitPython helper library for DC & Stepper Motor FeatherWing, Shield, and Pi Hat kits. |
| python3-adafruit-circuitpython-pca9685 | 3.3.4 | CircuitPython driver for motor, stepper, and servo based on PCA9685. |
| python3-adafruit-circuitpython-register | 1.9.10 | CircuitPython data descriptor classes to represent hardware registers on I2C and SPI devices. |
| python3-adafruit-platformdetect | 3.27.0 | Platform detection for use by libraries like Adafruit-Blinka. |
| python3-adafruit-pureio | 1.1.9 | Pure python (i.e. no native extensions) access to Linux IO including I2C and SPI. Drop in replacement for smbus and spidev modules. |
| python3-picamera | git | Python interface to the Raspberry Pi camera module |
| python3-rtimu | 7.2.1 | RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems |
| python3-sense-hat | 2.2.0 | Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission |
| raspi-gpio | git | Tool to help debug / hack at the BCM283x GPIO |
| raspidmx | 0.0+gitX | Some examples using the DispmanX API on the Raspberry Pi |
| rpi-bootfiles | 20240319 | Closed source binary files to help boot all raspberry pi devices. |
| rpi-cmdline | 1.0 | cmdline.txt file used to boot the kernel on a Raspberry Pi device |
| rpi-config | git | Commented config.txt file for the Raspberry Pi. The Raspberry Pi config.txt file is read by the GPU before the ARM core is initialised. It can be used to set various system configuration parameters. |
| rpi-eeprom | v.2024.02.16-2712 | Installation scripts and binaries for the Raspberry Pi 4 EEPROM |
| rpi-gpio | 0.7.1 | A module to control Raspberry Pi GPIO channels |
| rpi-test-image | 1.0 | A console-only image that fully supports the target device hardware. |
| rpi-u-boot-scr | 1.0 | U-boot boot scripts for Raspberry Pi |
| rpidistro-ffmpeg | 4.3.4 | A complete, cross-platform solution to record, convert and stream audio and video. |
| rpidistro-vlc | 3.0.17 | Video player and streamer - davinci edition |
| rpio | 0.10.1 | Advanced GPIO for the Raspberry Pi. Extends RPi.GPIO with PWM, GPIO interrups, TCP socket interrupts, command line tools and more |
| udev-rules-rpi | 1.0 | udev rules for Raspberry Pi Boards |
| udev-rules-udisks-rpi | 1.0 | add udisk/udev rule to hide boot partition from udev |
| userland | 20230419 | This repository contains the source code for the ARM side libraries used on Raspberry Pi. These typically are installed in /opt/vc/lib and includes source for the ARM side code to interface to: EGL, mmal, GLESv2,vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG. |
| vc-graphics | 20230509~buster | Graphics libraries for BCM2835. |
| vc-graphics-hardfp | 20230509~buster | Graphics libraries for BCM2835. |
| raspberrypi | RaspberryPi http://www.raspberrypi.org/ Board |
| raspberrypi-armv7 | RaspberryPi boards in 32 bit mode |
| raspberrypi-armv8 | RaspberryPi boards in 64 bit mode |
| raspberrypi-cm | RaspberryPi Compute Module (CM1) |
| raspberrypi-cm3 | RaspberryPi Compute Module 3 (CM3) |
| raspberrypi0 | RaspberryPi Zero board (https://www.raspberrypi.org/blog/raspberry-pi-zero) |
| raspberrypi0-2w | RaspberryPi0 2 Wifi in 32 bits mode |
| raspberrypi0-2w-64 | RaspberryPi0 2 Wifi in 64 bits mode |
| raspberrypi0-wifi | RaspberryPi Zero WiFi board (https://www.raspberrypi.org/blog/raspberry-pi-zero-w-joins-family/) |
| raspberrypi2 | RaspberryPi 2 |
| raspberrypi3 | RaspberryPi 3 in 32 bits mode |
| raspberrypi3-64 | RaspberryPi 3 in 64 bits mode |
| raspberrypi4 | RaspberryPi 4 in 32 bit mode |
| raspberrypi4-64 | RaspberryPi 4 in 64 bits mode |
| raspberrypi5 | RaspberryPi 5 in 64 bits mode |