| base-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building UHD installed. |
| bladerf-fpga |
0.6.0 |
Pre-built FPGA bitstreams for the Nuand bladeRF |
| gnuradio |
3.7.13.5 |
GNU Radio: A software defined radio framework. |
| gnuradio-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gnuradio-video-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gqrx |
|
|
| gqrx-demo-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio out of tree blocks installed. |
| gr-air-modes |
0.0.2+gitX |
A mode S receiver for GNU Radio. |
| gr-ais |
0.0.3+gitX |
Automatic Information System decoder for shipborne position reporting for the Gnuradio project |
| gr-baz |
0.0.7+gitX |
Collection of new blocks for GNU Radio |
| gr-burst |
0.0.5+gitX |
This out of tree module contains a number of blocks which help enable building simple burst PSK modems in GNU Radio. |
| gr-ettus |
0.0.4+gitX |
Experimental UHD and USRP features for GNU Radio. |
| gr-eventstream |
0.0.5+gitX |
GNU Radio Event Stream |
| gr-framers |
0.0.3+gitX |
This out of tree module contains several different framers and deframers which may be used with GNU Radio flowgraphs |
| gr-mac |
0.0.1+gitX |
Easy-to-use MAC-layer implementations for GNU Radio. |
| gr-mapper |
0.0.4+gitX |
This out of tree module contains a number of blocks to help perform mapping between bits and symbols |
| gr-message-tools |
0.0.4+gitX |
This is a OOTM to help with simple debugging with the PMT messages. |
| gr-osmosdr |
0.1.4.1 |
OsmocomSDR gnuradio block set |
| libbladerf |
1.7.2 |
Nuand bladeRF library and associatied utilities |
| libhackrf |
0.0.1 |
Libhackrf |
| libtecla |
1.6.2 |
Library for interactive command line editing |
| packagegroup-sdr |
1.0 |
|
| packagegroup-sdr-base |
1.0 |
|
| packagegroup-uhd |
1.0 |
|
| python-bitarray |
0.8.1 |
A high-level Python efficient arrays of booleans -- C extension |
| python-mako |
1.0.7 |
Templating library for Python |
| rtl-sdr |
0.5.3+gitX |
Software to turn the RTL2832U into a SDR |
| uhd |
3.14.1.1 |
Universal Hardware Driver for Ettus Research products. |
| uhd-dev-image |
1.0 |
A console-only image with a development/debug environment suitable for building GNURadio installed. |
| uhd-firmware |
003.010.002.000 |
Universal Hardware Driver Firmware |
| volk |
2.0.0 |
The Vector Optimized Library of Kernels |