Raspberry Pi board support

Setup information Mailing list

Git repository

git://git.yoctoproject.org/meta-raspberrypi web repo

Last commit: 3 years, 9 months ago (warrior branch)


Recipe name Version Description
armstubs 0.0+git76f64a28dc4685507d12f57fe5cfc89f6c32f8e6 Boot strap code that the GPU puts on memory to start running the boot loader
bcm2835 1.52 Package that provides access to GPIO and other IOfunctions on the Broadcom BCM 2835 chip, allowing access to theGPIO pins on the 26 pin IDE plug on the RPi board
bcm2835-bootfiles 20191021 Closed source binary files to help boot the ARM on the BCM2835.
bluez-firmware-rpidistro 0.0+gitX Linux kernel Bluetooth firmware files from Raspbian distribution
linux-firmware-rpidistro 0.0+gitX Linux kernel firmware files from Raspbian distribution
linux-raspberrypi 4.19.88+gitX Linux kernel
linux-raspberrypi 4.14.112+gitX Linux kernel
linux-raspberrypi-dev 4.19+gitX Linux kernel
linux-raspberrypi-rt 4.19.71+gitX Linux kernel
linux-raspberrypi-rt 4.14.81+gitX Linux kernel
omxplayer git A commandline OMX player for the Raspberry Pi
packagegroup-rpi-test 1.0 RaspberryPi Test Packagegroup
pi-blaster git This project enables PWM on the GPIO pins you request of a Raspberry Pi.
pi-bluetooth 1.1+gitX Script to properly configure BT-HCI on Raspberry Pi
python-rtimu git RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems
python-sense-hat 2.2.0 Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission
raspi-gpio git Tool to help debug / hack at the BCM283x GPIO
rpi-basic-image 1.0 A small image just capable of allowing a device to boot.
rpi-config git Commented config.txt file for the Raspberry Pi. The Raspberry Pi config.txt file is read by the GPU before the ARM core is initialised. It can be used to set various system configuration parameters.
rpi-gpio 0.6.3 A module to control Raspberry Pi GPIO channels
rpi-hwup-image 1.0 A small image just capable of allowing a device to boot.
rpi-test-image 1.0 A console-only image that fully supports the target device hardware.
rpi-u-boot-scr 1.0 U-boot boot scripts for Raspberry Pi
rpio 0.10.0 Advanced GPIO for the Raspberry Pi. Extends RPi.GPIO with PWM, GPIO interrups, TCP socket interrupts, command line tools and more
udev-rules-rpi 1.0 udev rules for Raspberry Pi Boards
udev-rules-udisks-rpi 1.0 add udisk/udev rule to hide boot partition from udev
userland 20190724 This repository contains the source code for the ARM side libraries used on Raspberry Pi. These typically are installed in /opt/vc/lib and includes source for the ARM side code to interface to: EGL, mmal, GLESv2,vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
vc-graphics 20191021 Graphics libraries for BCM2835.
vc-graphics-hardfp 20191021 Graphics libraries for BCM2835.
wiringpi git A library to control Raspberry Pi GPIO channels
raspberrypi RaspberryPi http://www.raspberrypi.org/ Board
raspberrypi-cm RaspberryPi Compute Module (CM1)
raspberrypi-cm3 RaspberryPi Compute Module 3 (CM3)
raspberrypi0 RaspberryPi Zero board (https://www.raspberrypi.org/blog/raspberry-pi-zero)
raspberrypi0-wifi RaspberryPi Zero WiFi board (https://www.raspberrypi.org/blog/raspberry-pi-zero-w-joins-family/)
raspberrypi2 RaspberryPi 2
raspberrypi3 RaspberryPi 3 in 32 bits mode
raspberrypi3-64 RaspberryPi 3 in 64 bits mode
raspberrypi4 RaspberryPi 4 in 32 bit mode
raspberrypi4-64 RaspberryPi 4 in 64 bits mode