| Description |
<p> ROS-Industrial support for the Fanuc R-2000iC (and variants). </p> <p> This package contains configuration data, 3D models and launch files for Fanuc R-2000iC manipulators. This includes the /125L, /165F, /210F, /210L and /270F variants. </p> <p> <b>Note</b>: for use with current ROS packages, the /210F is identical to the /165F and reuses the meshes, kinematic structure and the OPW parameters of the /165. Only the joint limits are different. </p> <p><b>Specifications</b>:</p> <ul> <li>R-2000iC/125L - "Conventional dress-out"</li> <li>R-2000iC/165F - "Conventional dress-out"</li> <li>R-2000iC/210F - "Conventional dress-out"</li> <li>R-2000iC/210L - "Conventional dress-out"</li> <li>R-2000iC/270F - "Conventional dress-out"</li> </ul> <p> Joint limits and maximum joint velocities are based on the information in the <em>FANUC Robot R-2000iC Mechanical Unit Operator's Manual</em> version <em>B-83644EN/01</em>. All urdfs are based on the default motion and joint velocity limits, unless noted otherwise (ie: no support for high speed joints, extended / limited motion ranges or other options). </p> <p> Before using any of the configuration files and / or meshes included in this package, be sure to check they are correct for the particular robot model and configuration you intend to use them with. </p> <p><b>Contributors</b>:</p> <p> This support package has received contributions from: Timo Birnkraut and Simon Schmeisser (125L), Didier Quirin (210F), Haris Suwignyo (Alten Nederland) (270F) and Ademola Oridate (Wilder Systems) (210L). </p> |