| phidgets-ik |
2.4.0-1 |
Driver for the Phidgets InterfaceKit devices |
meta-ros2-rolling |
| phidgets-ik |
1.0.10-1 |
Driver for the Phidgets InterfaceKit devices |
meta-ros1-noetic |
| phidgets-ik |
2.3.4-1 |
Driver for the Phidgets InterfaceKit devices |
meta-ros2-humble |
| phidgets-ik |
2.4.0-1 |
Driver for the Phidgets InterfaceKit devices |
meta-ros2-jazzy |
| phidgets-ik |
2.4.0-1 |
Driver for the Phidgets InterfaceKit devices |
meta-ros2-kilted |
| php74-pecl-xdebug |
3.1.6 |
Provides functions for function traces and profiling |
meta-parallel-php |
| php80-pecl-xdebug |
3.5.1 |
Provides functions for function traces and profiling |
meta-parallel-php |
| php81-pecl-xdebug |
3.5.1 |
Provides functions for function traces and profiling |
meta-parallel-php |
| php82-pecl-xdebug |
3.5.1 |
Provides functions for function traces and profiling |
meta-parallel-php |
| php83-pecl-xdebug |
3.5.1 |
Provides functions for function traces and profiling |
meta-parallel-php |
| php84-pecl-xdebug |
3.5.1 |
Provides functions for function traces and profiling |
meta-parallel-php |
| php85-pecl-xdebug |
3.5.1 |
Provides functions for function traces and profiling |
meta-parallel-php |
| phpmyadmin |
5.2.2 |
Web-based MySQL administration interface |
meta-webserver |
| phytool |
2+git |
PHY interface tool for Linux |
meta-networking |
| picknik-reset-fault-controller |
0.0.4-2 |
ROS 2 controller that offers a service to clear faults in a hardware interface |
meta-ros2-rolling |
| picknik-reset-fault-controller |
0.0.3-1 |
ROS 2 controller that offers a service to clear faults in a hardware interface |
meta-ros2-humble |
| picknik-reset-fault-controller |
0.0.4-1 |
ROS 2 controller that offers a service to clear faults in a hardware interface |
meta-ros2-jazzy |
| picknik-reset-fault-controller |
0.0.4-3 |
ROS 2 controller that offers a service to clear faults in a hardware interface |
meta-ros2-kilted |
| picovoice-msgs |
1.0.1-1 |
ROS interfaces for interacting with Picovoice driver nodes |
meta-ros1-noetic |
| pigz |
2.8 |
A parallel implementation of gzip |
openembedded-core |
| pim435 |
git |
A userspace driver application for PIM435 written in C |
meta-oe |
| pkcs11-provider |
1.0 |
An OpenSSL provider that allows direct interfacing with pkcs11 drivers |
meta-oe |
| pkcs11-provider |
1.0.imx |
An OpenSSL provider that allows direct interfacing with pkcs11 drivers |
meta-imx-bsp |
| ply |
2.4.0 |
Ply: A light-weight dynamic tracer for eBPF |
meta-oe |
| pmloglib-private |
3.3.0-13 |
webOS logging library - private interface |
meta-luneui |
| podman-tui |
v1.4.0+git |
podman-tui is a Terminal User Interface to interact with podman |
meta-virtualization |
| point-cloud-transport |
5.3.2-1 |
Support for transporting PointCloud2 messages in compressed format and plugin interface for implementing additional PointCloud2 transports. |
meta-ros2-rolling |
| point-cloud-transport |
1.0.20-1 |
Support for transporting PointCloud2 messages in compressed format and plugin interface for implementing additional PointCloud2 transports. |
meta-ros2-humble |
| point-cloud-transport |
4.0.7-1 |
Support for transporting PointCloud2 messages in compressed format and plugin interface for implementing additional PointCloud2 transports. |
meta-ros2-jazzy |
| point-cloud-transport |
5.1.6-1 |
Support for transporting PointCloud2 messages in compressed format and plugin interface for implementing additional PointCloud2 transports. |
meta-ros2-kilted |
| pose-base-controller |
0.4.1-1 |
A node that provides the move_base action server interface, but instead of planning simply drives towards the target pose using a control-based approach. |
meta-ros1-noetic |
| pps-tools |
1.0.3 |
User-space tools for LinuxPPS |
meta-oe |
| pr2-camera-synchronizer |
1.6.32-1 |
<p> The PR2 is equipped with a texture projector that can be used to project a texture onto featureless surfaces, allowing their three-dimensional structure to be determined using stereoscopy. The projector operates in a pulsed mode, producing brief (2ms) pulses of light. Cameras that want to see the texture must expose during the projector pulse; other cameras should be expose while the projector is off. </p> <p> This package contains the pr2_projector_synchronizer node. Based on its dynamically reconfigurable parameters, this node controls the projector pulsing, and sets up triggering of the WGE100 cameras. </p> |
meta-ros1-noetic |
| pr2-gripper-action |
1.10.18-1 |
The pr2_gripper_action provides an action interface for using the gripper. Users can specify what position to move to (while limiting the force) and the action will report success when the position is reached or failure when the gripper cannot move any longer. |
meta-ros1-noetic |
| pr2-gripper-sensor-action |
1.0.12-1 |
The pr2_gripper_sensor_action package provides an action interface for talking to the pr2_gripper_sensor_controller real-time controller. It provides several different actions for getting high-level sensor information from the PR2 palm-mounted accelerometers, fingertip pressure arrays, and gripper motor/encoder, as well as several sensor-based gripper control actions that respond with low-latency in real-time. |
meta-ros1-noetic |
| pr2-gripper-sensor-msgs |
1.0.12-1 |
The pr2_gripper_sensor_msgs package contains various actions and messages that are used in the pr2_gripper_sensor* packages. The structure of the API used by pr2_gripper_sensor_action, and pr2_gripper_sensor_controller packages is as follows: Users will send a goal to an Action in the message format of PR2Gripper*Command (where * replaces the name of the particular Action from pr2_gripper_sensor_action). Feedback and Result information for the action is then returned in the format of PR2Gripper*Data. |
meta-ros1-noetic |
| pr2-head-action |
1.10.18-1 |
The PR2 head action is a node that provides an action interface for pointing the head of the PR2. It passes trajectory goals to the controller, and reports success when they have finished executing. |
meta-ros1-noetic |
| proto2ros |
1.0.1-1 |
Protobuf to ROS 2 interoperability interfaces |
meta-ros2-humble |
| proto2ros |
1.0.1-1 |
Protobuf to ROS 2 interoperability interfaces |
meta-ros2-jazzy |
| psplash |
0.1+git |
Userspace framebuffer boot logo based on usplash |
openembedded-core |
| pugixml |
1.15 |
Light-weight C++ XML Processing Library |
meta-oe |
| pymoveit2 |
4.2.0-1 |
Basic Python interface for MoveIt 2 built on top of ROS 2 actions and services |
meta-ros2-rolling |
| pymoveit2 |
4.2.0-1 |
Basic Python interface for MoveIt 2 built on top of ROS 2 actions and services |
meta-ros2-humble |
| pymoveit2 |
4.2.0-1 |
Basic Python interface for MoveIt 2 built on top of ROS 2 actions and services |
meta-ros2-jazzy |
| pyrtm |
0.4.2 |
Python interface for Remember The Milk API |
meta-python |
| python3-adafruit-pureio |
1.1.9 |
Pure python (i.e. no native extensions) access to Linux IO including I2C and SPI. Drop in replacement for smbus and spidev modules. |
meta-raspberrypi |
| python3-aioredis |
2.0.1 |
The library is intended to provide simple and clear interface to Redis based on asyncio. |
meta-python |
| python3-argh |
0.31.3 |
An unobtrusive argparse wrapper with natural syntax |
meta-python |
| python3-blobfile |
3.0.0 |
Read GCS, ABS and local paths with the same interface, clone of tensorflow.io.gfile |
meta-python-ai |
| python3-cairocffi |
1.7.1 |
cairocffi is a CFFI-based drop-in replacement for Pycairo, a set of Python bindings and object-oriented API for cairo. |
meta-python |