meta-raspberrypi
Raspberry Pi board support
Setup information Mailing list
Git repository
git://git.yoctoproject.org/meta-raspberrypi web repo
Last commit: 4 years, 8 months ago (zeus branch)
Maintainer
- Andrei Gherzan email
| Recipe name | Version | Description |
|---|---|---|
| armstubs | 0.0+git76f64a28dc4685507d12f57fe5cfc89f6c32f8e6 | Boot strap code that the GPU puts on memory to start running the boot loader |
| bcm2835 | 1.52 | Package that provides access to GPIO and other IOfunctions on the Broadcom BCM 2835 chip, allowing access to theGPIO pins on the 26 pin IDE plug on the RPi board |
| bcm2835-bootfiles | 20191210 | Closed source binary files to help boot the ARM on the BCM2835. |
| bluez-firmware-rpidistro | 0.0+gitX | Linux kernel Bluetooth firmware files from Raspbian distribution |
| linux-firmware-rpidistro | 0.0+gitX | Linux kernel firmware files from Raspbian distribution |
| linux-raspberrypi | 4.19.93+gitX | Linux kernel |
| linux-raspberrypi | 4.14.114+gitX | Linux kernel |
| linux-raspberrypi-dev | 4.19+gitX | Linux kernel |
| linux-raspberrypi-rt | 4.19.71+gitX | Linux kernel |
| linux-raspberrypi-rt | 4.14.91+gitX | Linux kernel |
| omxplayer | git | A commandline OMX player for the Raspberry Pi |
| packagegroup-rpi-test | 1.0 | RaspberryPi Test Packagegroup |
| pi-blaster | git | This project enables PWM on the GPIO pins you request of a Raspberry Pi. |
| pi-bluetooth | 1.1+gitX | Script to properly configure BT-HCI on Raspberry Pi |
| python3-rtimu | git | RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems |
| python3-sense-hat | 2.2.0 | Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission |
| raspi-gpio | git | Tool to help debug / hack at the BCM283x GPIO |
| rpi-basic-image | 1.0 | A small image just capable of allowing a device to boot. |
| rpi-config | git | Commented config.txt file for the Raspberry Pi. The Raspberry Pi config.txt file is read by the GPU before the ARM core is initialised. It can be used to set various system configuration parameters. |
| rpi-gpio | 0.6.3 | A module to control Raspberry Pi GPIO channels |
| rpi-hwup-image | 1.0 | A small image just capable of allowing a device to boot. |
| rpi-test-image | 1.0 | A console-only image that fully supports the target device hardware. |
| rpi-u-boot-scr | 1.0 | U-boot boot scripts for Raspberry Pi |
| rpio | 0.10.0 | Advanced GPIO for the Raspberry Pi. Extends RPi.GPIO with PWM, GPIO interrups, TCP socket interrupts, command line tools and more |
| udev-rules-rpi | 1.0 | udev rules for Raspberry Pi Boards |
| udev-rules-udisks-rpi | 1.0 | add udisk/udev rule to hide boot partition from udev |
| userland | 20190724 | This repository contains the source code for the ARM side libraries used on Raspberry Pi. These typically are installed in /opt/vc/lib and includes source for the ARM side code to interface to: EGL, mmal, GLESv2,vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG. |
| vc-graphics | 20191210 | Graphics libraries for BCM2835. |
| vc-graphics-hardfp | 20191210 | Graphics libraries for BCM2835. |
| raspberrypi | RaspberryPi http://www.raspberrypi.org/ Board |
| raspberrypi-cm | RaspberryPi Compute Module (CM1) |
| raspberrypi-cm3 | RaspberryPi Compute Module 3 (CM3) |
| raspberrypi0 | RaspberryPi Zero board (https://www.raspberrypi.org/blog/raspberry-pi-zero) |
| raspberrypi0-wifi | RaspberryPi Zero WiFi board (https://www.raspberrypi.org/blog/raspberry-pi-zero-w-joins-family/) |
| raspberrypi2 | RaspberryPi 2 |
| raspberrypi3 | RaspberryPi 3 in 32 bits mode |
| raspberrypi3-64 | RaspberryPi 3 in 64 bits mode |
| raspberrypi4 | RaspberryPi 4 in 32 bit mode |
| raspberrypi4-64 | RaspberryPi 4 in 64 bits mode |