| gpio-button-hotplug |
1.0 |
Simple GPIO Button Hotplug driver |
meta-tanowrt |
| gpio-control |
|
|
meta-ros1-melodic |
| gpio-controller |
|
|
meta-ros1-noetic |
| gpio-controllers |
6.3.0-1 |
Controllers to interact with gpios. |
meta-ros2-rolling |
| gpio-controllers |
2.52.1-1 |
Controllers to interact with gpios. |
meta-ros2-humble |
| gpio-controllers |
4.39.0-1 |
Controllers to interact with gpios. |
meta-ros2-jazzy |
| gpio-controllers |
5.13.0-1 |
Controllers to interact with gpios. |
meta-ros2-kilted |
| gpio-shutdown |
1.0 |
GPIO shutdown bindings for SysV init |
meta-raspberrypi |
| gpio-test |
1.0 |
Sample application for AMD GPIO driver |
meta-amd-bsp |
| libgpiod |
1.6.3 |
C library and tools for interacting with the linux GPIO character device |
meta-oe |
| libgpiod |
1.6.4 |
C library and tools for interacting with the linux GPIO character device |
meta-intel-edison-distro |
| libgpiod |
2.0 |
C library and tools for interacting with the linux GPIO character device |
meta-intel-edison-distro |
| python3-gpiod |
2.0 |
Python bindings for libgpiod. |
meta-intel-edison-distro |
| raspi-gpio |
git |
Tool to help debug / hack at the BCM283x GPIO |
meta-raspberrypi |
| rpi-gpio |
0.7.0 |
A module to control Raspberry Pi GPIO channels |
meta-raspberrypi |
| sgpio |
1.2.0.10 |
SGPIO captive backplane tool |
meta-oe |
| bcm2835 |
1.71 |
Package that provides access to GPIO and other IOfunctions on the Broadcom BCM 2835 chip, allowing access to theGPIO pins on the 26 pin IDE plug on the RPi board |
meta-raspberrypi |
| button-hotplug |
1.0 |
OpenWrt Button Hotplug driver |
meta-tanowrt |
| c-periphery |
2.3.1 |
C-Periphery lib used to access GPIO, LED, PWM, SPI, I2C, MMIO, Serial |
meta-oe |
| ffw-robot-manager |
1.1.14-1 |
ROS2 controller that logs GPIO Error Code and Hardware Error Status for all GPIO devices. |
meta-ros2-rolling |
| ffw-robot-manager |
1.1.21-1 |
ROS2 controller that logs GPIO Error Code and Hardware Error Status for all GPIO devices. |
meta-ros2-jazzy |
| libsoc |
0.8.2 |
Library for interfacing with common SoC peripherals |
meta-oe |
| openocd |
0.10.0 |
Open On-Chip Debugger - configured to run SWD using imx6ul gpio |
meta-vesta |
| pi-blaster |
git |
This project enables PWM on the GPIO pins you request of a Raspberry Pi. |
meta-raspberrypi |
| pya20 |
0.2.12 |
A module to control Allwinner GPIO,SPI and I2C channels |
meta-sunxi |
| python-periphery |
2.0.0 |
A pure Python 2/3 library for peripheral I/O (GPIO, LED, PWM, SPI, I2C, MMIO, Serial) in Linux. |
meta-python2 |
| python3-periphery |
2.3.0 |
A pure Python 2/3 library for peripheral I/O (GPIO, LED, PWM, SPI, I2C, MMIO, Serial) in Linux. |
meta-python |
| python3-powerrelay |
git |
REST API to control GPIO chips |
meta-labgrid |
| rpio |
0.10.1 |
Advanced GPIO for the Raspberry Pi. Extends RPi.GPIO with PWM, GPIO interrups, TCP socket interrupts, command line tools and more |
meta-raspberrypi |