| rqt-guiblacklisted |
1.0.5-1 |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui. |
meta-ros2-dashing |
| rqt-guiblacklisted |
1.0.5-1 |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui. |
meta-ros2-eloquent |
| rqt-guiblacklisted |
1.0.6-1 |
rqt_gui provides the main to start an instance of the ROS integrated graphical user interface provided by qt_gui. |
meta-ros2-foxy |
| rqt-rosmonblacklisted |
2.2.1-1 |
rqt GUI for rosmon, the node launcher and monitor for ROS. rosmon is a replacement for the roslaunch tool, focused on performance, remote monitoring, and usability. |
meta-ros1-melodic |
| rs485test |
0.2 |
Tool to test RS485 interface in half duplex mode on target side |
meta-phytec |
| rs485test-native |
0.2 |
Tool to test RS485 interface in half duplex mode on target side |
meta-phytec |
| rsyslog |
8.1910.0 |
Rsyslog is an enhanced multi-threaded syslogd |
meta-oe |
| ruby-aws-partitions |
1.445.0 |
RubyGem: aws-partitions |
meta-sca |
| ruby-multi-json |
1.15.0 |
RubyGem: multi_json |
meta-sca |
| ruby-thor |
1.1.0 |
RubyGem: thor |
meta-sca |
| ruby-train |
3.6.2 |
RubyGem: train |
meta-sca |
| ruby-unicode-display-width |
2.0.0 |
RubyGem: unicode-display_width |
meta-sca |
| rubygems-erubis |
2.7.0 |
RubyGem: erubis |
meta-rubygems |
| rubygems-highline |
1.7.10 |
RubyGem: highline |
meta-rubygems |
| rubygems-mixlib-archive |
1.1.7 |
RubyGem: mixlib-archive |
meta-rubygems |
| rubygems-mixlib-cli |
2.1.8 |
RubyGem: mixlib-cli |
meta-rubygems |
| rubygems-multi-json |
1.15.0 |
RubyGem: multi_json |
meta-rubygems |
| rubygems-net-ssh-multi |
1.2.1 |
RubyGem: net-ssh-multi |
meta-rubygems |
| rubygems-rack |
2.2.3 |
RubyGem: rack |
meta-rubygems |
| rubygems-syslog-logger |
1.6.8 |
RubyGem: syslog-logger |
meta-rubygems |
| rubygems-thor |
1.1.0 |
RubyGem: thor |
meta-rubygems |
| rubygems-unicode-display-width |
2.0.0 |
RubyGem: unicode-display_width |
meta-rubygems |
| ruli |
0.36 |
RULI stands for Resolver User Layer Interface It's a library built on top of an asynchronous DNS stub resolver |
meta-networking |
| s3c24xx-gpio |
1.0+gitX |
A user-space tool to show and modify the state of GPIOs on the S3c24xx platform |
meta-oe |
| s3c64xx-gpio |
1.0+gitX |
A user-space tool to show and modify the state of GPIOs on the S3c64xx platform |
meta-oe |
| sanlock |
3.8.0 |
A shared storage lock manager |
meta-oe |
| satyr |
0.28 |
Satyr is a collection of low-level algorithms for program failure processing, analysis, and reporting supporting kernel space, user space, Python, and Java programs |
meta-oe |
| sblim-sfcb |
1.4.9 |
Small Footprint CIM Broker |
meta-oe |
| schunk-sdhblacklisted |
0.6.14-1 |
This package provides an interface for operating the schunk dexterous hand (SDH), including the tactile sensors. |
meta-ros1-melodic |
| schunk-simulated-tactile-sensorsblacklisted |
0.6.14-1 |
This package provides simulated tactile sensors for the Schunk Dextrous Hand (SDH) which is mounted on the Care-O-bot arm. The node subscribes to the Gazebo bumper topics of the SDH. It transforms the Gazebo feedback to the "tactile_data" topic to provide the same tactile sensor interface as the schunk_sdh package. The following parameters can be set: * cells_x: The number of patches on the tactile sensor in the direction perpendicular to the finger. Defaults to 6. * cells_y: The number of patches on the tactile sensor along the direction of the finger. Defaults to 14. * output_range: The maximum output value of one patch. Defaults to 3500. * sensitivity: The change of output in one patch per Newton. Defaults to 350. The sensitivity can be approximated by the following formula: S = output_range / (measurement_range * cell_area) - The measurement range of the tactile pads is 250 kPa (from the data sheet). - The output range can be determined by experiment from the real SDH. It is about 3500. - The cell area is the size of one patch. Length and width of the area are determined by dividing the length/width of the collision surface by the number of cells in the respective direction. Important: In most cases this is NOT the cell area that is given in the data sheet! * filter_length: The length of the moving average filter which smoothes the values from simulation. Defaults to 10. The node subscribes to the following topics to receive data from the simulation: * thumb_2/state * thumb_3/state * finger_12/state * finger_13/state * finger_22/state * finger_23/state The node publishes the processed data on the following topic: * tactile_data The simulated bumper must obtain the collision data in the link that the sensor is attached to. This is achieved by setting the "frameName" property in the gazebo_ros_bumper controller. |
meta-ros1-melodic |
| serial |
1.2.1 |
Serial is a cross-platform, simple to use library for using serial ports on computers. This library provides a C++, object oriented interface for interacting with RS-232 like devices on Linux and Windows. |
meta-ros1-melodic |
| sick-safetyscannersblacklisted |
1.0.4-1 |
Provides an Interface to read the sensor output of a SICK Safety Scanner |
meta-ros1-melodic |
| single-joint-position-action |
1.10.17-1 |
The single joint position action is a node that provides an action interface for commanding a trajectory to move a joint to a particular position. The action reports success when the joint reaches the desired position. |
meta-ros1-melodic |
| sjf2410-linux-native |
1.0+gitX |
JTAG utility to interface w/ a S3C2410 device |
meta-oe |
| slirp4netns |
0.4.1 |
User-mode networking for unprivileged network namespaces. |
meta-virtualization |
| smach-msgs |
2.0.1 |
this package contains a set of messages that are used by the introspection interfaces for smach. |
meta-ros1-melodic |
| smach-viewerblacklisted |
3.0.0-1 |
The smach viewer is a GUI that shows the state of hierarchical SMACH state machines. It can visualize the possible transitions between states, as well as the currently active state and the values of user data that is passed around between states. The smach viewer uses the SMACH debugging interface based on the <a href="http://www.ros.org/wiki/smach_msgs">smach messages</a> to gather information from running state machines. |
meta-ros1-melodic |
| spectacle |
19.08.3 |
The new screenshot capture utility, replaces KSnapshot |
meta-qt5-extra |
| spf13-pflag |
v1.0.0-rc4+gitX |
Drop-in replacement for Go's flag package, implementing POSIX/GNU-style --flags. |
meta-virtualization |
| spi-lld-rtos |
2020.4.16 |
TI RTOS low level driver for Serial Peripheral Interface (SPI) |
meta-ti |
| ssiapi |
1.3.0 |
Intel RSTe with Linux OS SSI API Library |
meta-oe |
| std-capabilities |
0.1.0 |
This package contains standard capability interfaces, which describe common robot capabilities in terms of ROS concepts such as topics, services, actions, and parameters. |
meta-ros1-melodic |
| stressapptest |
1.0.9 |
Stressful Application Test |
meta-oe |
| swig |
3.0.12 |
SWIG - Simplified Wrapper and Interface Generator |
openembedded-core |
| swig |
3.0.8 |
SWIG - Simplified Wrapper and Interface Generator |
meta-atmel |
| syslog-ng |
3.19.1 |
Alternative system logger daemon |
meta-oe |
| system-config-keyboard |
1.4.0 |
a graphical user interface that allows the user to change the default keyboard of the system |
meta-oe |
| systemd |
243.2 |
A System and service manager |
openembedded-core |
| systemd-boot |
243.2 |
A System and service manager |
openembedded-core |
| tcpslice |
1.2a3 |
tcpslice |
meta-networking |