| tcpreplay |
4.5.2 |
Use previously captured traffic to test network devices |
meta-voltumna |
| test-nowarnings-perl |
1.06 |
In general, your tests shouldn't produce warnings. This modules causes any warnings to be captured and stored. It automatically adds an extra test that will run when your script ends to check that there were no warnings. If there were any warnings, the test will give a "not ok" and diagnostics of where, when and what the warning was, including a stack trace of what was going on when the it occurred. |
meta-cpan |
| test-regexp-perl |
2017040101 |
This module is intended to test your regular expressions. Given a subject string and a regular expression (aka pattern), the module not only tests whether the regular expression complete matches the subject string, it performs a "utf8::upgrade" or "utf8::downgrade" on the subject string and performs the tests again, if necessary. Furthermore, given a pattern with capturing parenthesis, it checks whether all captures are present, and in the right order. Both named and unnamed captures are checked. |
meta-cpan |
| u-boot-artik7 |
NEXELL |
U-Boot for artik710-raptor |
meta-nexell |
| umi |
1.0.0-10 |
AudioOutputd adaptation layer (UMI) API definition and test harness |
meta-luneos |
| umi |
1.0.0-11 |
AudioOutputd adaptation layer (UMI) API definition and test harness |
meta-webosose |
| usb-can-udev-conf |
1.0 |
USB CAN adapter udev configuration |
meta-agl-demo |
| uwsim-osgbullet |
3.0.1-3 |
The OSG Bullet library adapted to UWSim. See https://code.google.com/p/osgbullet |
meta-ros1-melodic |
| uwsim-osgocean |
1.0.4-1 |
The OSG Ocean library adapted to UWSim. See https://code.google.com/p/osgocean |
meta-ros1-melodic |
| uwsim-osgworks |
3.0.3-2 |
The OSG Works library adapted to UWSim. See https://code.google.com/p/osgworks |
meta-ros1-melodic |
| vo-amrwbenc |
0.1.3 |
VisualOn Adaptive Multi Rate Wideband (AMR-WB) encoder |
meta-multimedia |
| vrpn-mocap |
1.1.0-3 |
ROS2 <a href="https://github.com/vrpn/vrpn">VRPN</a> client built primarily to interface with motion capture devices such as VICON and OptiTrack. A detailed list of supported hardware can be found <a href="https://github.com/vrpn/vrpn/wiki/Available-hardware-devices">here</a>. |
meta-ros2-rolling |
| vrpn-mocap |
1.1.0-1 |
ROS2 <a href="https://github.com/vrpn/vrpn">VRPN</a> client built primarily to interface with motion capture devices such as VICON and OptiTrack. A detailed list of supported hardware can be found <a href="https://github.com/vrpn/vrpn/wiki/Available-hardware-devices">here</a>. |
meta-ros2-humble |
| vrpn-mocap |
1.1.0-4 |
ROS2 <a href="https://github.com/vrpn/vrpn">VRPN</a> client built primarily to interface with motion capture devices such as VICON and OptiTrack. A detailed list of supported hardware can be found <a href="https://github.com/vrpn/vrpn/wiki/Available-hardware-devices">here</a>. |
meta-ros2-jazzy |
| vrpn-mocap |
1.1.0-4 |
ROS2 <a href="https://github.com/vrpn/vrpn">VRPN</a> client built primarily to interface with motion capture devices such as VICON and OptiTrack. A detailed list of supported hardware can be found <a href="https://github.com/vrpn/vrpn/wiki/Available-hardware-devices">here</a>. |
meta-ros2-kilted |
| wca-support |
1.0.0-5 |
webOS connman adapter support library |
meta-luneos |
| wca-support |
1.0.0-5 |
webOS connman adapter support library |
meta-webosose |
| wca-support-api |
1.0.0-5 |
webOS connman adapter support API |
meta-luneos |
| wca-support-api |
1.0.0-5 |
webOS connman adapter support API |
meta-webosose |
| wifi-connect |
4.11.3+X |
WiFi Connect is a utility for dynamically setting the WiFi configuration on a Linux device via a captive portal. WiFi credentials are specified by connecting with a mobile phone or laptop to the access point that WiFi Connect creates. |
meta-ossystems-base |
| wifi-connect |
4.11.84 |
Easy WiFi setup for Linux devices from your mobile phone or laptop |
meta-chaos |
| xapian-core |
1.4.21 |
Xapian is an Open Source Search Engine Library |
meta-intel-edison-distro |
| xf86-video-cirrus |
1.6.0 |
X.Org X server -- cirrus display driver |
openembedded-core |
| xf86-video-cirrus |
1.6.0 |
X.Org X server -- cirrus display driver |
meta-voltumna |
| xfce4-genmon-plugin |
4.3.0 |
This plugin cyclically spawns the indicated script/program, captures its output (stdout) and displays the resulting string into the panel. |
meta-xfce |
| xpp-quadrotor |
1.0.10 |
The URDF file for a quadrotor to be used with the xpp packages and a simple rviz publisher of quadrotor tfs. Adapted from Daniel Mellinger, Nathan Michael, Vijay Kumar, "Trajectory Generation and Control for Precise Aggressive Maneuvers with Quadrotors". |
meta-ros1-melodic |
| xpp-quadrotor |
1.0.10-1 |
The URDF file for a quadrotor to be used with the xpp packages and a simple rviz publisher of quadrotor tfs. Adapted from Daniel Mellinger, Nathan Michael, Vijay Kumar, "Trajectory Generation and Control for Precise Aggressive Maneuvers with Quadrotors". |
meta-ros1-noetic |
| xvinfo |
1.1.5 |
Print out X-Video extension adaptor information |
openembedded-core |
| xwd |
1.0.9 |
xwd is a tool to capture an X window or screen to file |
meta-oe |